CNC-602A Injector Cleaner & Tester

group name: launch tool

Min Order: 1 piece

model: CNC-602A Injector Cleaner & Tester

update time: Mon, 07 May 2012 01:08:36 GMT

contact supplier

Paramtents

brand launch

Packging & Delivery

Min Order1 piece

Briefing

launch CNC-602A Injector Cleaner & Tester can clean and test injectors and clean on the injectors and fuel supply system.

Detailed

Introduction for CNC-602A Injector Cleaner & Tester

CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Descriptions for CNC-602A Injector Cleaner & Tester

Feature

Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.

Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.

Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.

Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.

Auto. test: To test injectors by simulating different working conditions.

On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Specification

Power supply: □AC220V±10%, 50/60Hz;□AC110V±10%, 50/60Hz.

Input power: 250W;

Ultrasonic cleaner power: 100W;

Simulated RPM range: 10~9990rpm; step: 10rpm;

Time range: 1~9999s;

Pulse width: 0.5~25ms; step 0.1 ms;

Fuel tank capacity: 4700ml;

Dimensions: 605mm*495mm*600mm;

Weight: About 41kg