Automotive Sensor Simulator & Tester Add71

contact supplier

Packging & Delivery

Briefing

Automotive Sensor Simulator Tester Add71 is the most complete diagnostic for sensors,wiring,connector and on-board computers

Detailed

Measure the signals of automotive sensors
	·	The most complete hand held diagnostic tester for sensors,wiring,connectors
		and on-board computers
		DC voltage,lambda,frequency and pulse signals can be measured
	·	Digital display shows actual output of signals
	·	Measures any voltage AC or DC,resistance or frequency output
Allows Simulation of most Sensor and computer managemeng omponents
	·	Simulating temperature sensors,throttle potentiometers,switches,air
		flow meters and lembda/oxygen srnsors
	·	Features AC voltage output to simulate vehicle speed sensors(vss),
		CAM,CRANK,and ignition reluctors
	·	Simulates actual working condition of any sensor without having to remove it
		from the vehicleA.B.S.,Crank,Can,Coolant,Oxygen,MAP,MAF,MAT,VSS,etc
Cheeks basic ECU operation
	·	Controlling the signals being produced allows you to check ECU response and
		operation.This prevents mis-diagnosis where the fault may lie in the ECU itself
		or in the wiring between the component and the ECU.Works independently or with
		any scan tool ever made
Can be used on any domestic or import vehicle
Eliminates unnecessary replacement of non-defective sensors
Can drive computer into"open or closed loop."

Features:

Specifications:

Simulate Signal	Range	Function
DC Voltage	0-1V	Simulating lambda/oxygen sensors
	0-5V	Simulating DC signal of sensors
	0-12V
Resistance	0-5K	Simulating temperature or resistance sensors
	0-200K
Frequency SignalV/Duty/Hz	0-5v 10-90% 10-4KHz	Simulating frequency signal sensors
	0-12V 10-90% 10-4KHz

Test Function	Range	Basic Accuracy
DC Voltage	400mV,4v ,40v,400v,1000v	±(0.5%+3d)
AC Voltage	400mV,4v ,40v,400v,750v	±(0.8%+3d)
DC Current	40mA,400mA,10A	±(1.2%+3d)
AC Current	40mA,400mA,10A	±(1.5%+3d)
Resistance(Ω)	400,4K,40K,400K,4M,40M	±(1.0%+3d)
Capacitance	40nF,400nF,4μF,40μF,100μF	±(5.0%+3d)
Frequency	10Hz-10MHz	±(0.5%+3d)
Duty cycle	0.1%-99.9%	±(2.0%+3d)
Diode test and Audible Continuity test		Test current:1±0.6mA
		>60Ω Buzzer sounds