Follow us :

Ignition System Kv Quick Tester Add760

Ignition System Kv Quick Tester Add760
Ignition System Kv Quick Tester Add760Ignition System Kv Quick Tester Add760
group name
Add Auto Diagnostic Tools
Min Order
1 piece
model
Ignition System Kv Quick Tester Add760
update time
Fri, 01 Jun 2012 09:24:40 GMT

Packging & Delivery

  • Min Order1 piece

Briefing

The KV Ignition system quick tester ADD 760 is designed to work on distributor and DIS systems, it can quick measure KV value.

Detailed

 

Ignition System Kv Quick Tester Add760

Description:

The Coil On Plug (COP) Quick Ignition tester is a battery-operated, hand-held quick tester and it is designed to easily and quickly determine if a COP is producing a proper spark for the plug.

The quick tester works by receiving a signal from the secondary ignition coil. Once the signal is received, the tester determines if the COP is producing the correct amount of voltage and the duration of the arc. If the voltage is correct, the tester beeps and the red LED light flashes; and if the duration of the arc is correct, the green LED will also flash

Applications:

Test Results
Red LED Light
Consistent, steady flashing and beeping indicates the COP is producing the correct amount of voltage.
No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage. This may be caused by one of the following:

1.Fouled spark plug, or incorrect gap
2.Damaged/corroded wires or connectors
3.Faulty coil or PCM

Green LED light
Consistent and steady flashing indicates the duration of the arc is correct.

No response or an inconsistent response
indicates the duration of the arc is NOT correct. This may be caused by one of the following:
1.Shorted windings inside the coil
2. Resistance or bad connections in the
3. primary / secondary connections
4. Faulty coil